Anybody using one of these in a late model truck with ABS
Anybody using one of these in a late model truck with ABS
http://img.photobucket.com/albums/v6...nstruckls1.jpg
05 Joe Gibbs RCSB 5 gear
99 Vette / 6 gear
02 Honda Goldwing
00 Hayabusa
it would work, i have an extra line lock that was made for my 2001 Z28, it would work for the truck, just have to have some lines bent to fit the silverado.
I have a new unit and was just wondering if I would run into any problems with the ABS. I know most of you guys with Auto's don't have a need for one of these but us guys with the sticks have a hard time holding the brakes and gas pedal at the same time.
http://img.photobucket.com/albums/v6...nstruckls1.jpg
05 Joe Gibbs RCSB 5 gear
99 Vette / 6 gear
02 Honda Goldwing
00 Hayabusa
HahaThats why you get a built auto tranny.jk
A stick is much more fun to drive than an auto.
2007 CCSB Z71 VortecMax: Stock!
it just depends on what you want out of your vehicle really, if you want to cruise around and get better gas mileage then a stick is better (especially a t56) but if you want to drag race and win then the auto is ideal.
the line lock will not hurt abs, just pump the brakes a few times, hit the switch and let off the pedal.
I would love to see a write up on this since I think I will need a line lock too!
2007c CCSB 2wd lowered 2/2 Stock!
2002 RCSB 2wd H/C 5.3l T56
LQ4, 243, 228R, Holley Hi Ram, 4L80e, 4.56 - in the works!