+ Reply to Thread
Results 1 to 5 of 5

Thread: return line pressure?

  1. #1
    Join Date
    Feb 2010
    Location
    Odessa, texas
    Posts
    916

    return line pressure?

    how much pressure is on the return line? would regular fuel line be fine?
    1983 Ford Ranger- 2.3 to 205k mile 6.0 swap

  2. #2
    Join Date
    Dec 2008
    Location
    san antonio TX
    Posts
    1,365
    im not sure how much pressure goes through the return line.but im running a vette style reg because my have a returnless fuel rail, i used regular fuel injection hose with a clamp for the return and havent had a problem. on the pressure side i used -6 AN hose and fittings.
    Last edited by lechez71; 05-26-2010 at 05:00 AM.
    1982 c10 lsx swaped, NP tuned, true duals, 4:11s, trutrac, e-fans, CAI

  3. #3
    Join Date
    Feb 2010
    Location
    Odessa, texas
    Posts
    916
    cool..since im doing my own fuel system and the high pressure line is kinda expensive i was tryin to save some money and if i would use regular line it sure would be nice
    1983 Ford Ranger- 2.3 to 205k mile 6.0 swap

  4. #4
    Join Date
    Mar 2003
    Location
    San Antonio, TX
    Posts
    11,038
    Even on my big setup. It's only 20psi. Just depends

  5. #5
    Join Date
    Feb 2010
    Location
    Odessa, texas
    Posts
    916
    well i wont have a ''BIG'' setup..maybe 2 inline 255 walbros
    1983 Ford Ranger- 2.3 to 205k mile 6.0 swap

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts