+ Reply to Thread
Results 1 to 3 of 3

Thread: Close race with a Lighting

  1. #1
    Join Date
    Dec 2004
    Location
    Andrews, NC
    Posts
    204
    I meet this guy at my college and he was all talkin about his lighting that it was pushing 16 psi and he had the dialbo chip in it ect ect anyway I told him we would have to line them up one day. The mods to my truck are 5.7LS1 with whipple pushing 8psi. I started to leave college and noticed he pulled out in front of me. when we got on the interstate I got beside of him and waited for him to make a move sure enough he took of then I did to within 20 to 30 yards I had pulled past him. I decided to do it again so I pulled up beside him but he got the jump this time and about the time I pulled up beside him we started to get into traffic so slowed back down. All in all I know I could of bet him but that last race was pretty close. I talked to him and as soon as commerse opens were going to line them up at the strip but anyway I will make sure to get some video when that time comes.
    2002 GMC Seirra scsb, 5.7LS1, Twin 62-1 turbos, Compcam 222/218, 4l80e, and Hptuners

    2006 GTO Black/Red, 6.0 M6, 238/240 cam, SW LT, exhaust & bolt ons = 438rwhp411rwtq!

  2. #2
    Join Date
    Oct 2003
    Location
    Houston
    Posts
    209
    Look forward for the results!
    99 Pewter SCSB
    DJM 4/6 drop, Hotchkis front/reat swaybars,Hypertech power programer, milled & built heads, Accel wires, distributer,coil, Mass Air Flow Sensor(mti motor sports, Granatelli),Dynomax UltraFlow Stainless, 17x8.5 Eagle Alloys, Escalade door handles, Suburban front grille, with clear corners and billet bowtie,Street Scene mirrors, Cowl Hood

  3. #3
    Join Date
    Jun 2004
    Location
    george west texas
    Posts
    3,694
    kick his ass 1 more time for the home team!!!
    '13 silverado LT...stock

    '11 lt 4x4 z71..tvs1900

    '01 gmc twins 6.0 jakes 400 ladder bars w/ coilovers tuned by nelson performance

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts