ok today i was getting some progress done with the 5.3L swap in my 82 c10. i bought a new filler neck for the gas tank. i taped the tank where the filler tube goes so trash woudnt get in. today i was removing the tape to put the filler tube, and a piece of tape fell in the tank. will it cause any problems? the intank pump has the filter sock. i dont really want to drop the tank again.
1982 c10 lsx swaped, NP tuned, true duals, 4:11s, trutrac, e-fans, CAI
How big of a piece....lol
2000 Silverado ECSB- 5.3 CAI, Pacesetter LTs, ORY- Pipe, Magnaflow XL, E-fan, Ported T/B , Nelson Tuned, Built 4l60e, Circle D Stall, 3.42s G80, 2-4 Drop, Hertz Highs, Rockford 501s
2004 Buell XB12s
Originally Posted by LamboDoNoMo
about 1" long, it was kinda rolled in a ball
1982 c10 lsx swaped, NP tuned, true duals, 4:11s, trutrac, e-fans, CAI
if it feel straight down, cant you jsut get one of those small grabbers and get it out?
Gas will dissolve it over time, I dont know how much your pump will pull but the ball might become a clog and you could go wicked lean all of the sudden, or it may be heavy enough to just sit at the bottom of the tank and dissolve.
2006 SilveradoLittle Black Bitch
good news guys i tied a piece of hose to my vacum cleaner and it sucked it out. it took a while but i got it out.good thing the tank was emty
1982 c10 lsx swaped, NP tuned, true duals, 4:11s, trutrac, e-fans, CAI
Nice! I would never have thought about using a vacuum.
2010 Silverado ECSB LS 4x4. Only mods so far are a K&N drop in filter and a Rough Country 2" front level kit
Posting Permissions
Reply With Quote
