I just got an autometer electric fuel pressure gauge and I can't figure out how to get that sending unit attacthed to the schrader valve. I think the sending unit has a 3/8" nipple and I have no clue what size/pitch the shrader valve threads are. Please help
~ Forged engine of some type ~ Ball bearing turbo of an unconfirmed size ~ 4L8000 trans ~ Beefy fuel system ~
here is what you need.
you sure? the diameter on the sending unit is about 3/8" diameter. Or should I be looking at the size of the orifice?
~ Forged engine of some type ~ Ball bearing turbo of an unconfirmed size ~ 4L8000 trans ~ Beefy fuel system ~
Here it is installed. Worked great for me.
Well I ordered the fittings. I just hope my luck doesn't kick in. If it does I'm screwed but I take it the that fuel rail on that blower has the same schrader valve as my stock fuel rails. Thanks Foggy
~ Forged engine of some type ~ Ball bearing turbo of an unconfirmed size ~ 4L8000 trans ~ Beefy fuel system ~
Posting Permissions
Reply With Quote