+ Reply to Thread
Results 1 to 6 of 6

Thread: truck problems

Hybrid View

  1. #1
    Join Date
    Nov 2007
    Location
    Chandler, Ok
    Posts
    156

    truck problems

    Ok my little 98 is very tempermanetal or something. Im thinking that its the neutral safety switch but i need your input as well. The truck some days will start fine but other days it wont start at all. just go out turn the ignition and nothing, other days go out and starts right up. broke down wouldnt start at work brought it home and threw it in neutral to move it and started right up. ran for a week no problem at all then let my brother drive it to school and nothing when he went to leave. any ideas?
    My names: MATT
    AGE: 20
    Drive: 1998 legend conversion silverado

    Status:Married, one gorgeous daughter, mystery baby on the way, and broke! Hopin to find engine soon...

    shirt size: Medium

  2. #2
    Join Date
    Aug 2008
    Location
    North Texas
    Posts
    12,078
    Has the trans ever been out? Sometimes the connectors are glued in and the wires getting damaged and/or pulled out of the connector when they're unplugged. Could also be a random security issue (although N would not help that) or an intermittent starter/ignition switch.

  3. #3
    Join Date
    Nov 2007
    Location
    Chandler, Ok
    Posts
    156
    I had the transmission rebuilt about 9 months ago
    My names: MATT
    AGE: 20
    Drive: 1998 legend conversion silverado

    Status:Married, one gorgeous daughter, mystery baby on the way, and broke! Hopin to find engine soon...

    shirt size: Medium

  4. #4
    Join Date
    Aug 2008
    Location
    North Texas
    Posts
    12,078
    OK...check the wiring over good.

  5. #5
    Join Date
    Nov 2007
    Location
    Chandler, Ok
    Posts
    156
    will do thanks man
    My names: MATT
    AGE: 20
    Drive: 1998 legend conversion silverado

    Status:Married, one gorgeous daughter, mystery baby on the way, and broke! Hopin to find engine soon...

    shirt size: Medium

  6. #6
    Join Date
    Feb 2007
    Location
    Fort Worth
    Posts
    9,578
    Yeah, the connectors at the Prindle switch could be connected properly or the Prindle switch is on the fritz...

    2000 ECSB 6.0L
    TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts