+ Reply to Thread
Results 1 to 9 of 9

Thread: Tool box, Wheels/Tires, Muffler, Tip, Stock Stuff

  1. #1
    Join Date
    Jun 2008
    Posts
    270

    Toolbox, Wheels/Tires, Suspension, Exhaust, Stock Stuff

    Got some things for sale, mostly stuff I don't have use for anymore.


    This is a Weather Gaurd Model 121-0-01 Low Profile Aluminum Saddle Box. This is an extremely nice box in extremely good condition. This box has Extreme Protection locks that are high quality and will last you for years and years. These boxes are also almost impossible to break in to. Weather Guard boxes also feature an Armor-Tuf Clear coat that ensures they will look good and last for a long time.

    I have kept great care of the box and the only blemish I can find is a small dent in the front left on the box. There are also a few scuffs where the box mounts but those of course can not be seen when mounted. I tried to take a picture of the dent but it is so small I couldn't get a good picture of it. This box includes the sliding tray and the red level holders that can be attached to the back of the box, and all necessary mounting hardware. I am located in Baytown and price is $400 SOLD.

    The wheels and tires will be local pick up only.



    Stock 16" Wheels with Discover Tires - $200 OBO
    These tires are in good condition and the rims are in good condition as well. They still clean up pretty nice and the center caps do have a few little scratches, but nothing out of the ordinary. These will come with the stock lug nuts.


    Titan 18" Wheels with Goodyear Wrangler Tires - $200 SOLD
    The tires do still have tread but will probably need to be changed soon. The wheels will come with the Nissan center caps not the ones shown in the picture and they will also come with the lug nuts that fit the Nissan Titan if the buyer wants them. These wheels look great on a set of street tires. Just look at Thumper550's truck!


    The center caps and lug nuts in the picture are also for sale. I added some padding around the center cap to make them fit in the Nissan wheel. This can easily be removed if the center caps will be used for the 20" GM accessory wheel (which is what they are originally designed to fit). The lug nuts are also used on the 20" GM accessory wheel and include the 4 locking lugs with the key. I recently purchased both of these for near $300. GM really likes those center caps. I will let both go for $180 shipped, $100 for the center caps and $100 for the lugs.
    Last edited by MKader17; 06-02-2009 at 09:44 AM. Reason: Updated Prices and Pictures!

    MKader17

  2. #2
    Join Date
    Jun 2008
    Posts
    270
    Next up is all my stock stuff...


    GM 8.25 Front differential with 3.73 gears. Has about 126K miles on it. $300/Make Offer


    2WD U-bolts. What you need to drop the rear end of a Z-71 to make it level $25 SOLD.


    Stock Z-71 U-bolts and Lift Blocks. Can be used to lift the rear end of your 2wd 2 inches. Use this and an add-a-leaf and you've got 4 inch lift in the rear. $50 Shipped


    Front drive shaft - $60
    Stock Knuckles - $60
    Z-71 Aluminum Skid Plate - $40
    Transmission skid plate - $15
    Torsion to LCA link - $15
    All OBO

    Stock Fan w/ working clutch - $20
    Stock air intake assembly - $40
    Fan Shroud - $15
    All OBO
    Last edited by MKader17; 06-02-2009 at 09:46 AM.

    MKader17

  3. #3
    Join Date
    Jun 2008
    Posts
    270
    And the exhaust stuff...


    I have for sale a Gibson Muffler with 3" Dual Inlets and 2.5" Dual Outlets. This muffler is made of stainless steel. ($60).

    I have one exhaust tip made by Gibson as well ($25 shipped).

    and 4 2.5" and 1 3" (not pictured) stainless steel exhaust clamps $7/ea shipped



    Stock Cat-back - $50



    You can see the stock manifolds under all the exhausr stuff - $30
    There is an array of aluminized 3" and Stainless 2.5". Though the stainless has more surface rust than the aluminized. Come pick up what ever you want of it for $20.
    Last edited by MKader17; 05-25-2009 at 11:57 AM.

    MKader17

  4. #4
    Join Date
    Jan 2009
    Location
    Augusta, Ks
    Posts
    3,246
    Interested in the Titan wheels. Where are you located
    2000 Silverado ECSB- 5.3 CAI, Pacesetter LTs, ORY- Pipe, Magnaflow XL, E-fan, Ported T/B , Nelson Tuned, Built 4l60e, Circle D Stall, 3.42s G80, 2-4 Drop, Hertz Highs, Rockford 501s

    2004 Buell XB12s

    Quote Originally Posted by LamboDoNoMo View Post
    "Never give up, NEVER BACK DOWN!!!"

  5. #5
    Join Date
    Jun 2008
    Posts
    270
    I'm located in Baytown, Tx.

    MKader17

  6. #6
    Join Date
    Jan 2009
    Location
    Augusta, Ks
    Posts
    3,246
    To far for me to drive. lol. Thats a 10 hr trip just to ge there
    2000 Silverado ECSB- 5.3 CAI, Pacesetter LTs, ORY- Pipe, Magnaflow XL, E-fan, Ported T/B , Nelson Tuned, Built 4l60e, Circle D Stall, 3.42s G80, 2-4 Drop, Hertz Highs, Rockford 501s

    2004 Buell XB12s

    Quote Originally Posted by LamboDoNoMo View Post
    "Never give up, NEVER BACK DOWN!!!"

  7. #7
    Join Date
    Jun 2008
    Posts
    270
    Prices and pics updated. Make me some offers. PM Me for a faster response
    Last edited by MKader17; 05-25-2009 at 12:39 PM.

    MKader17

  8. #8
    Join Date
    Jun 2008
    Location
    Houston
    Posts
    2,348
    interested in the titan wheels sending PM
    74 Austin Morris Mini 1000 - Daily Coil Spring conversion, lowered, Disc Brake conversion
    FOR SALE: 04 RC/LB Duramax -12 second tow pig, built Allison, Tune, and supporting mods
    FOR SALE: 03 Silverado SS -DBRods built 40X, DP, Suspension. Going for fast

  9. #9
    Join Date
    Jun 2008
    Posts
    270
    Updated. Some Items still for sale.

    MKader17

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts