Hey guys I have a 97 silverado 1500 4x4 that I'm looking to drop a 5.3 or 6.0 into. I have searched this site for over an hour and so far no luck on how to wire up a ls series in this truck. I want to keep it good on fuel but have more power for when I'm pulling my race s10 to the track.
welcome to ls1truck!! nice truck!! does this thread not help you?
http://www.ls1truck.com/forums/lsx-t...onversion.html
Simple: 408 on steroids!
single digits coming soon!
I have electronic 4 wheel drive, I would need to get a hold of a full pinout for my ecm to see if the 4 wheel has anything to do with the ecm or not. That is my only concern with doing this swap.
Welcome! My buddy was the man that actually made the harness to my truck, we'd be more than happy to help with questions about the swap and the wiring.
1993 Gmc 02 ls1 Circle D 3400 stall, long tubes, 220/224 cam stage 3 heads, weiand intake, auburn posi, 389rwhp 352ft/lbs
Welcome
'00 1/2 TON ECSB 5.3L 4L60E
K&N Filter,Gibson Exhaust,Superchips Programmer,Billet Servos,'03+ Taillights,White Door Handles,Carbon Metallic Grille Emblem,6000K HID'S
Welcome.
Welcome to the site!
07 Z71 4x4, 6.0L, 3.73s, Turbonetics T76 @ 10 psi, 75 shot, Snow meth kit, PLX DM-100 wideband gauge, Nelson tune, Comp 212/216 .557/.561 114 lsa, 60# injectors, Yank 3000, 4L80E , Magnaflow - dumped, e-cutout
Line-X, Pace Edwards Full Metal Jackrabbit bedcover
Welcome. Im sure there is something on here about the wiring...tons of people have done similar swaps so I would assume that there is info on it.
Lets see some pics of the race s-10....what does it have in it?
T-RAV99 GMC | 5.3 | Skinny White Guy Tuned
hopefully I can get all the wiring diagrams of the 4 wheel drive and figure it out from there.
Here's a few pics of the s10. It's got a 388 stroker 13-1 only have one good pass on it so far, broke the trans bell housing the best time so far is a 11.062 @127 mph. It will be back at the track soon installing a jw ultra bell tomorrow.
Welcome to LS1truck! We have tons of info here. Either use that link Skeet gave you or contact Nelson Performance for a wiring harness...Originally Posted by pitrow
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Posting Permissions
Reply With Quote
