Drop torsion bar keys??

[Jeremy K]

I was going to crank the torsion bars down on my factory keys to get a 1" drop. But instead I went and got some torsion bar keys out of a 2001 chevy 3/4 ton truck. I've been told these will give me 2" of drop and not hurt my ride as bad. Has anyone ever done this? If so any ips and hint on how to install them. Thanks!

How far should do I turn my bolts in?
Does anyone know any sites that has step by step instructions?

[SCIV]

I was going to crank the torsion bars down on my factory keys to get a 1" drop. But instead I went and got some torsion bar keys out of a 2001 chevy 3/4 ton truck. I've been told these will give me 2" of drop and not hurt my ride as bad. Has anyone ever done this? If so any ips and hint on how to install them. Thanks!

How far should do I turn my bolts in?
Does anyone know any sites that has step by step instructions?

I have them. I think a full turn = 1/8" in height adjustment or similar. Do a search on silveradoss.com for step by step instructions. Hint: don't skimp out on the puller, you CAN lose fingers. It is very simple to do.

Get it aligned afterwards & post pics.