+ Reply to Thread
Results 1 to 9 of 9

Thread: my first...

Hybrid View

  1. #1
    Join Date
    Apr 2008
    Location
    Birmingham, AL
    Posts
    3,626

    my first...

    I ran into one of my friends today that has about an 06 duramax. Hes put about 5k worth of performance mods into it, so its pretty fast! We both had some time to kill so we pulled onto the road goin up to my house. Its about a half mile long and perfectly flat and straight. I started us and off the line i pulled him by about a half length. When we hit about 40 we were even and when we got about half way down the road and goin 75 0r 80 he was about 1/2 length in front. Even though I lost, id say my truck did pretty good for only having an intake vs. his fully tuned w/ full turbo back Banks exhaust and intake!
    01 Silverado

  2. #2
    Join Date
    Jul 2007
    Location
    Cedar Park,TX
    Posts
    270
    5 grand for a tuner, intake, and exhaust??

    Nice run but a Dmax with 5k in mods will be pushing low 11's.
    01' 2500HD 4X4
    6.0L 4l80E
    stock....
    -Chris

  3. #3
    Join Date
    Feb 2008
    Location
    delaware
    Posts
    147
    i dont know about low 11 but it would be fast it also depends on which d- max he has lbz or so on but nice run

    Spunky xoxo

  4. #4
    Join Date
    Oct 2007
    Location
    Bandera, TX
    Posts
    2,921
    Ya, an 06 lbz done right on 5k woth of mods will do low 12s. And they are monsters off the line. I never get touched off the line by anything 2wd on the street. Just curiouse which tuner he has.
    single digit street truck


    for build info

    http://www.ls1truck.com/forums/my-ga...cs-garage.html

    The best advice I have ever heard:... Only take B( . Y . )ST advice from someone that is CURRENTLY running a turbo setup close to, or bigger than what you want......

  5. #5
    Join Date
    Feb 2008
    Location
    delaware
    Posts
    147
    i know my freind 06 ecsb 2500 lbz with8500in it is a 12.20 truck but the trans and converter was like 3000 grand for the parts but also the 8500 is with us doing the work and it is very fun out of the whole especially on the shot

    Spunky xoxo

  6. #6
    Join Date
    Apr 2008
    Location
    Birmingham, AL
    Posts
    3,626
    Hes got an edge programmer, i think. He might have some more mods too, thtas all that im sure he has done. Im sure he would have KILLED me off the line, but he just spun until abut 2nd
    01 Silverado

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts