+ Reply to Thread
Results 1 to 3 of 3

Thread: Airaid modula intake tube ?

  1. #1
    Join Date
    Apr 2008
    Location
    Okeechobee, Fl
    Posts
    2,007

    Airaid modula intake tube ?

    I have an aftermarket cone air filter rigged on the end of my stock intake tube is the airaid tube worth the $100? Or will i not notice a difference?

  2. #2
    Join Date
    Jan 2008
    Location
    burlington,Co
    Posts
    290
    the airaid tube is like stock but without that big ugly chamber below it,cut that off and cap the hole and you will have the same thing.Save that $100 and get some longtubes.IMO
    2008 Trailblazer SS 2wd red jewel 1ss
    Forged 365,Tvs1900@11psi,IW 8 rib overdrive,duel pass heat ex,Prc heads,blower cam,Yank,Aeromotive,ect

  3. #3
    Join Date
    Feb 2007
    Location
    Fort Worth
    Posts
    9,578
    Don't just do a filter swap. Replace the entire CAI setup--from the filter to the TB. AirRaid, Volant, K&N, AEM all make decent CAIs for our trucks.

    2000 ECSB 6.0L
    TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts