Saturday im goin to a skid school for the day with my pops, so im dropping the truck off and getting it alligned, new rocker panels, new front control arms, and i think im gonna have him install the vette servo while its there. Im hoping she will drive very nice after that.
2000 Silverado Ecsb 5.3 Z71. Work in progress...
Well i bring in my truck to the shop today and show the guy the vette servo and he tells me he cant install it on my truck unless he drops the tranny.....
2000 Silverado Ecsb 5.3 Z71. Work in progress...
i might be wrong but i think hes fos.mine was installed in the truck.
mods:2004 sierra ext sb,20s ,big brake kit w,hawk pads,air bagged,2006 6.0 lq4 swap,vortec supercharged10psi, air to water intercooled w/ dual electric fans on it ,snow meth injection kit,60lbers, e-fans ,big radiator swap ,cam 218 /222 548/550 comp .hardened prs .1.85 comp roller rockers ,guideplates ,crane double springs,trans 4l65e built .pacesetter l/ts true duals w/x pipe and magnaflows,14 bolt rearend swap ,3.73s,aroemotive fuel pump system w/elec.fuel controller and bypass regulator a/n fittings, taylor 10.5s interceptor gauge,aem w/b a/f ,autometer boost/vac NELSON 93 OCTANE TUNED .
you dont have to drop the tranny at all. well on mine you didnt
1951 3100
1984 C10
Then don't have him do it - because he doesn't know what he's talking about. You don't need to drop the trans to put the servo in.
**** looking at your truck he doesnt even need to jack it up lmao!!!
^^^^^ what he said^^^^^^
Simple: 408 on steroids!
single digits coming soon!
ya i kno im not gonna go to him, i think im gonna do it myself, i just didnt wanna touch my tranny much in case i did somethin to it but ill see
2000 Silverado Ecsb 5.3 Z71. Work in progress...
I did mine in a gravel driveway and some cardboard....um...and i didnt pull the trans!What a dumbass! I cant understand how these guys stay in business
Vortec Performance Tuned
LQ9 built 4L60 LTs and a billion miles on the speedo!
You can do it with the tranny in, but you will need some decent leverage to shove the new servo back in place so that you can fully install the keeper ring. Its a very easy process...
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Posting Permissions
Reply With Quote
