I RAISED IT FINALLY! (sorry for camera phone pic haha)
it looks damn good! Even too! Its about a 15 min Job....
I cranked the front end up 1" 1/2..But the only thing is I had to take it to get the front wheels aligned after..But that costed 20$
Its a little little rougher in the front..But I still like it
Im getting the tune soon...And an Intake for free on wednesday haha...What else? Besides exhaust? Something that wont void warranty?
2012 F-250 XLT/FX4 RCLB 6.7 Powerstroke
H&S XRT Pro Race(550hp/1100tq)/ 4" flopro exhaust/H&S EGT kit/SPE Full diff unlock/S&B CAI/H&S motorsports upcharge pipe kit/ DPF,CAT,EGR,UREA Deleted/Icon 3.5" Lift-Vs 2.0 shocks/PMF DSS w' Bilstein 5100s/Icon Adj Track Bar-upgraded steel bearing/RIGID LEDs/Kenwood DNX570HD w/idatalink maestro/Hertz5x7s/Memphis 12" slim/500.1 JL slash amp/Recon f250 led emblems
window tint. I dont think that voids the warranty but definately get it.
1951 3100
1984 C10
Im an idiotOriginally Posted by duckysbht
forgot to mention Im getting that tomorrow...I hate bare glass haha
2012 F-250 XLT/FX4 RCLB 6.7 Powerstroke
H&S XRT Pro Race(550hp/1100tq)/ 4" flopro exhaust/H&S EGT kit/SPE Full diff unlock/S&B CAI/H&S motorsports upcharge pipe kit/ DPF,CAT,EGR,UREA Deleted/Icon 3.5" Lift-Vs 2.0 shocks/PMF DSS w' Bilstein 5100s/Icon Adj Track Bar-upgraded steel bearing/RIGID LEDs/Kenwood DNX570HD w/idatalink maestro/Hertz5x7s/Memphis 12" slim/500.1 JL slash amp/Recon f250 led emblems
Haha--you should name your truck the fish bowl... But pretty soon, you'll be ridin' dirty! So, cranking the torsion bars helped out? It looks good! Is it that much more of a rough ride? Did you have to shave your bumps stops at all? Exhaust will help for sure. I am not sure if headers will void the warranty or not... If you are concerned about the warranty, just do the exhaust and tune for now and then once the warranty period is up, thear into that thing and get mo powa outta that little 4.8L!
Last edited by txarkitekt; 09-25-2007 at 03:11 PM.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
No need to shave the bump stops when you raise the front.:p
Last edited by foggy; 09-25-2007 at 03:37 PM.
Some people like to shave them to increase the articulation of the front suspension components. It's only from what I've heard...I think some people do that because they end up bottoming out the front suspension more because they think just because they "lifted" the front that they can jump stuff or climb steeper grades... I don't know...
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Looks good Aggie. What an improvement!
Jamest
12 Sec. Club! SOLD
La Viuda negra/ a.k.a. Black Betty
LQ4 6.0L, WCCH HEADS, LEVEL 5 FLT 4L80E TRANS. WITH TRANS BREAK, YANK 3200 STALL, TRICK TURBO, TURBONETICS T-76 TURBO, CUSTOM INTERCOOLED, 68lb INJECTORS, CUSTOM S/D TUNE FROM NELSON PERFORMANCE, COMP CAM 212/214 .557/.559 116+2, SNOW METH. KIT, . ALL INSTALLED AND DYNOED AT NELSON PERFORMANCE: 5**?HP @ 5073rpms and 5**TQ @ 4389rpms AT THE WHEELS WITH 10 PSI OF BOOST. ALL 3/4 TON TRUCK 5435LBS, NOTHING TAKEN OFF, STREET TIRES, AND USUALLY 2 BABY SEATS. WANNA RIDE?
SOLD***
looks nice!! will it mess up the headlight adjustment also?
Naw Mayne:p haha
Its actually raising the whole front end....Not just the body...
What exhaust option should I go with?
Since its a body lift..Pipes would look kinda retarted hanging down low..
Mabye just a turn down 50 Series Flowmaster?
Fish Bowl?
2012 F-250 XLT/FX4 RCLB 6.7 Powerstroke
H&S XRT Pro Race(550hp/1100tq)/ 4" flopro exhaust/H&S EGT kit/SPE Full diff unlock/S&B CAI/H&S motorsports upcharge pipe kit/ DPF,CAT,EGR,UREA Deleted/Icon 3.5" Lift-Vs 2.0 shocks/PMF DSS w' Bilstein 5100s/Icon Adj Track Bar-upgraded steel bearing/RIGID LEDs/Kenwood DNX570HD w/idatalink maestro/Hertz5x7s/Memphis 12" slim/500.1 JL slash amp/Recon f250 led emblems
That's what all us brotha's call a car when it has no tint... Click here. It's the Urban Dictionary. It explains everything to us non-thug white kids...
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Posting Permissions
Reply With Quote
