Ha...I forgot about that one. That is another one that makes me laugh.Originally Posted by pl4yboy
For the record, it's "lengths" guys. ie: "You lost to my Titan by 3 car lengths"...
Ha...I forgot about that one. That is another one that makes me laugh.
For the record, it's "lengths" guys. ie: "You lost to my Titan by 3 car lengths"...
Fixed!!!
cjriojas:if you're weather man is a 5 gallon bucket, YOUUUUUUUUUUU might be a redneck
danger_ranger83: I see now why it cost so much to get a harness made... FML
2boostedSilverado: I like Casey's rear end, I want to chat with him about it
Don't forget "are" and "our". We're going to work on are trucks today.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
I took my 862 cylinder heads in to get the valves ground and the seats re-cut. Oh, and the deck surfaces were milled as well. Anyways, the fellow that accepted the heads when I dropped them off asked if I had the new ''Valve Seats.'' I made him repeat it twice... Then I asked him to indicate with his finger where exactly this part should be located on the head. He pointed to the machined surface where the base of the valvesprings rest. I said, ''Oh, you mean the valve springs seats/seals.'' He said... ''No, they are called valve seats man, trust me...I've been doing this for 20 years.'' Luckily at this time the actual ''Head'' expert showed up and assured me ''That guy will never touch a set of cylinder heads as long as I am employed here.''
Terminology....
Carter Key - Cotter Pin <<<< Most often confused terms ever. You hear stuff like ''Cotter Key.''
[IMG]https://images.app.goo.gl/XLfskemekXBo5VfS7/IMG]
www.tjc.edu
Drinking O'dules doesn't count.
99 Silverado 1500 4x4 RC 4.8
4L60E, 3.73, Homemade CAI, 92oct Quik tuned,08 Tahoe radiator/fans, Dumped exhaust... summed up one loud pig caller |[226K! on odometer|
What about slang words.
I tumpt the trash over.
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
i wish people would get back to building killer turbo trucks! ps, I will never forget to use spell check again. sorry to all who are offended, i beg of thee forgiveness.
5.3 2wd upgrades: Nelson tune, stainless lt's, magnaflow, e-fans, msd's, cai.
Just for the record, I don't take offense to the spelling and grammar errors. I just read some posts and try to figure out what people are trying to say. I do like helping people out but I can't do that when I can't decipher what they type.
~ Forged engine of some type ~ Ball bearing turbo of an unconfirmed size ~ 4L8000 trans ~ Beefy fuel system ~
Agreed, although there are plenty of guys on here with some pretty powerful turbo setups.......hopefully I'll be there one day
~ Forged engine of some type ~ Ball bearing turbo of an unconfirmed size ~ 4L8000 trans ~ Beefy fuel system ~
my feces hurt from walkin it out all day, you know what I sayin
txstvanwilder: but i got lube so i didnt complain
mean05: he told me a price and i bent over and lubed up
truckinL33: 6'' is not enough, and 12'' is too much
pcmcobra: don't drink and bid on egay...lol
408.Luke: lol im not blowing im investing
Posting Permissions
Reply With Quote
