Well I decided to put the truck on the rollers again before I start the stroker build again. This is on a 200 shot with 15* total timing. Still on a stock 6.0 shortblock with ported 243 heads and FAST 92 intake. The A/F on the motor is 12.2-12.4 and on the spray is 11.8 holding steady. The shot is still a little fat due to the higher power numbers. Keeping it safe. I didn't get a print out of the NA pull but it was 580ftlbs and 470hp. Enjoy and all comments are welcome.
Keep in mind this is through a 3200 stall and a 80E with a two piece driveshaft and 4.10 gears.
Reply With Quote