ducky

[Gator]

Ducky I have an intake manifold off of a 04 6.0 which has two fuel line connection comming off of the drived side fuel rail...i believe this would make it a fuel return system....you can have it if you want it...it will need a through cleaning since it came off of a flood vehicle.....if this will help you out let me know

[TXsilverado]

heck, its been so long im not even sure why i had the front cover off. if memmory serves right thats the cover that i took off of the Ls1 so i could use my newer cover becaues i was 100% that my gasket was fine...im 95% sure that the gasket on that cover is fine too. i wouldnt wory about it. i didnt even realize that it was a returnless fuel rail on the intake. sounds like gator has the hookup though

[foggy]

Ducky, make sure you put your crank pulley on before you tighten the front cover.

[ducky]

heck, its been so long im not even sure why i had the front cover off. if memmory serves right thats the cover that i took off of the Ls1 so i could use my newer cover becaues i was 100% that my gasket was fine...im 95% sure that the gasket on that cover is fine too. i wouldnt wory about it. i didnt even realize that it was a returnless fuel rail on the intake. sounds like gator has the hookup though

Yeah there actually wasnt a gasket at all on the front, but its no worries I replaced those and the valve covers anyway

Ducky, make sure you put your crank pulley on before you tighten the front cover.

Yeah the crank pulley was on, I actually meant the back cover was off of the engine.

Ducky I have an intake manifold off of a 04 6.0 which has two fuel line connection comming off of the drived side fuel rail...i believe this would make it a fuel return system....you can have it if you want it...it will need a through cleaning since it came off of a flood vehicle.....if this will help you out let me know

The intake I have is brand new, I wonder if I could like switch it out at the dealership for another one. I doubt they will let me do that. But that 04 intake you have, how bad of a shape is it in? Also my engine is an 01, so wouldnt I need to take the throttle body off the 01 and put it on the 04?

[Gator]

Yeah there actually wasnt a gasket at all on the front, but its no worries I replaced those and the valve covers anyway



Yeah the crank pulley was on, I actually meant the back cover was off of the engine.



The intake I have is brand new, I wonder if I could like switch it out at the dealership for another one. I doubt they will let me do that. But that 04 intake you have, how bad of a shape is it in? Also my engine is an 01, so wouldnt I need to take the throttle body off the 01 and put it on the 04?

Ducky man i don't know, it looks good but who knows? It would probably cost you $20 to $25 to get it there...u might be able to find one in a junk yard localy for the same price.....

[ducky]

I'm probably gonna end up going and finding one at a junkyard. I would really like to wrap this up by the end of the weekend, but who knows.

[1slow01z71]

You know the rear cover has to be centered on the crank or the rear flange will burn through the seal and spew oil into your bellhousing.