PCM problem

[2001silverado]

I was changing the shift points with the programmer and while udating the computer it got interrupted. So now the programmer is giving me an error which diablosport told me it was an easy fix, to just reflash the pcm. Well the truck will not start so I had to get it towed home today, the dealership wants $80 to reflash it ( basically 1hr of labor for 15 mins of work) :flipoff: So I was wondering where can I send the PCM to by itself to have it reflashed, to keep me from paying another tow truck.

[chev5.3]

<div class='quotetop'>QUOTE(2001silverado &#064; Jul 9 2007, 08&#58;56 PM) [snapback]99067[/snapback]</div>

I was changing the shift points with the programmer and while udating the computer it got interrupted. So now the programmer is giving me an error which diablosport told me it was an easy fix, to just reflash the pcm. Well the truck will not start so I had to get it towed home today, the dealership wants &#036;80 to reflash it ( basically 1hr of labor for 15 mins of work) :flipoff: So I was wondering where can I send the PCM to by itself to have it reflashed, to keep me from paying another tow truck.
[/b]

same thing happend to my 2001 but with super chips, i took it to the dealer about 5 minutes from home they re flashed the pcm, and i threw away my supershit. It was about 85 at the dealer.

[RedHeartbeat]

Carquest can do it if you have one in your area. Dealer can, too, but you have to get the truck to them so they load the updated PCM and BCM software at the same time, if there are updates. Takes the dealer about 10 minutes but they like to charge 30minutes to an hour for the service.

[2001silverado]

Thanks for the replys guys but I have decided to just pull the PCM out and replace it with another PCM that I had before the supercharger. I pulled the S/C off today and will just sell it to get my money back, once I get the programmer back from diablosport (I had to get it reset also).