224/224 comp cam and 7.35 pushrods

**farmtruc** · 06-12-2007 11:12 AM

new this would be $380cam/$129rods

How about $275 for both?

**BEATERTRUCK** · 06-12-2007 01:51 PM

what lift and lsa

**racermech** · 06-13-2007 06:05 PM

Did you mil head? I'm asking because is that why the pr's are shorter than stock? If so, how much did you deck them, because i'm doing the same. I'm interested in the push rods.

**racermech** · 06-14-2007 08:56 PM

**farmtruc** · 06-14-2007 09:20 PM

Milling the heads will require a shorter pushrod. These parts came from a customer's truck and I'm not sure what he did.
I believe the heads were milled about .5 thousandths.

**RedHeartbeat** · 06-14-2007 10:20 PM

Hopefully it was .050" or fifty thousandths.

.5 thousandths is hard to measure.

**carfreak07** · 06-14-2007 10:37 PM

<div class='quotetop'>QUOTE(farmtruc @ Jun 12 2007, 09:12 AM) [snapback]96479[/snapback]</div>

new this would be $380cam/$129rods

How about $275 for both?
[/b]

Would you happen to know the part number on this cam, does it have the xer lobes?

**farmtruc** · 06-14-2007 10:46 PM

<div class='quotetop'>QUOTE(carfreak07 @ Jun 14 2007, 08:37 PM) [snapback]96797[/snapback]</div>

Would you happen to know the part number on this cam, does it have the xer lobes?
[/b]

Ya, it's the big lift cam, I'll post up the exact specs.

LOL Red, that's what I meant, thanks.

allen

**racermech** · 06-18-2007 09:32 PM

How much for just push rods?

Thread: 224/224 comp cam and 7.35 pushrods

Thread Tools

Display

Posting Permissions