Did you disconnect the battery just before going for inspection? Allen turns off the rear 02 sensor codes so they don't report to the obdii port during inspection. The same thing can be done to the evap codes. If you recently cleared any codes it has to go through 50-100 miles of driving to check all sensors for feedback.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
<div class='quotetop'>QUOTE(RedHeartbeat @ May 4 2007, 11:49 AM) [snapback]92360[/snapback]</div>I did the crank relearn on Wednesday, and the check engine light went off, but it was still showing P0315 on the scanner so I cleared the codes with the Interceptor gauge this morning before getting it inspected.Did you disconnect the battery just before going for inspection? Allen turns off the rear 02 sensor codes so they don't report to the obdii port during inspection. The same thing can be done to the evap codes. If you recently cleared any codes it has to go through 50-100 miles of driving to check all sensors for feedback.
[/b]
Does that help?
Gone, but not forgotten!
Posting Permissions
Reply With Quote