<div class='quotetop'>QUOTE(RedHeartbeat &#064; Apr 23 2007, 09&#58;36 PM) [snapback]91137[/snapback]</div>
Bakerelectronix.com has a tach module to fix the pulse count. 3/16-1/4" thick steel plate is plenty thick to hold the engine. The factory stuff is only about 1/8". I used 1/4" plate last time I made a set.
[/b]
i made mine so to set the engine forward to clear the a/c compressor and use the OE location
of the transmission Xmember i used scap .750" billet aluminum for the adapter plates. also i used
turners v8 stands to locate the mounts to the Kmember instead of using the frame rails

airdeano