+ Reply to Thread
Results 1 to 7 of 7

Thread: Stock Tranny

  1. #1
    Join Date
    May 2006
    Location
    Waco TX
    Posts
    3,113
    I was reading over on LS1tech about some issues with trannys after TC install.

    I am planning on installing a Fuddle 3000 Stall(working a deal out with cody-1slowZ71)

    Will my stock tranny be ok with this 3000 stall? How long is my tranny going to last me? The only upgrade I have is Corvette Servo.

    Thanks in Advance!

    Daniel!
    DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31

    2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts


  2. #2
    Join Date
    Sep 2006
    Location
    Coon Rapids, MN
    Posts
    1,219
    depends on how nice you are to the tranny. but i know what would happen if i had a 3k stall. it would not last long with the way i drive and thats why i now have a bad tranny. any way back to the subject , id get it , have fun and hope you dont break stuff too bad

    04 Grand Prix GTP
    03 Z71 wanting a Turbo ,Stall, and Tune BAD
    THE SURGEON GENERAL SAYS NOTHING ABOUT SMOKIN A FORD

  3. #3
    Join Date
    Jan 2007
    Location
    San Antonio,TX
    Posts
    40
    you should get that 3k stall! if you have a stock tranny the only thing you should do is put a shift kit in there. and get one that u like and every thing should be good!!
    92SHORTBED

  4. #4
    Join Date
    Apr 2005
    Posts
    4,229
    Add a shift kit (call Allen for some good deals). Smoke 'em.
    Gone, but not forgotten!

  5. #5
    Join Date
    Aug 2005
    Posts
    383
    Get a shift kit. You have a 65E which is a bit beefier than the 60E. You'll be alright for awhile IMO.

    03 Chevy ECSB, Z71, 6.0L(LQ4), Maggie @ 9PSI, 4l80E, PI Vig 2800, Detroit True-Trac, 4.10, 90mm LS2 TB, Meth Injection, HSW Dry N20, LPE GT7 Cam, 918 springs, Dynatech LT's, Hi Flow cats, custom stainless exhaust, DMH cutouts, DJM Suspension Drop, E-Fans, AirAid, HPT 2Bar SD Tuned, 11.68 @ 114.2

  6. #6
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    +1, go for it. Hell, it's only money. If you burn it up that gives you a good reason to beef it up stronger or to get yourself an FLT or one of Jerry's trannies.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  7. #7
    Join Date
    Dec 2006
    Posts
    23
    <div class='quotetop'>QUOTE(Red03SilSS &#064; Jan 26 2007, 10&#58;19 AM) [snapback]81311[/snapback]</div>
    I was reading over on LS1tech about some issues with trannys after TC install.

    I am planning on installing a Fuddle 3000 Stall(working a deal out with cody-1slowZ71)

    Will my stock tranny be ok with this 3000 stall? How long is my tranny going to last me? The only upgrade I have is Corvette Servo.

    Thanks in Advance&#33;

    Daniel&#33;
    [/b]
    we have the best deals on built trannies right now call us TRT PERFORMANCE 817 703 3750 ask for billy

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts