Great pics! The gaskets are installed with both tabs in the front and the word "FRONT" to the front of the block with the drivers side upside down. I know the gaskets are installed correctly because I verified them upon installation. I haven't had time to look at the problem but it acts like the systom is air locked but I can't imagine that either. I'm going to pull the thermostat and drain the coolant to inspect. I've been to busy to mess with it but I'll figure it out. I"ll keep you posted with the results. As far as the pics you posted, I'm sure someone that doesn't know how to install the gaskets will defininetly benefit from this post.

I bet you had flow through the radiator even with your gasket backwards huh? I have no flow whatsoever. I bet you could bolt plates to the top of the block and still have some sort of coolant flow because the pump pulls off the block, not the heads. I could be wrong but I doubt it.

Thanks