NEED a crank puley for a 6.0L LQ9. I am not sure if an LQ4 is the same or not.
NEED a crank puley for a 6.0L LQ9. I am not sure if an LQ4 is the same or not.
Gone, but not forgotten!
Hell, what is the price on a new one? About $100?
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
$150. Am I splitting hairs here? Shit my money tree must be related to yours.
Gone, but not forgotten!
Could be. A local engine builder might have one laying around from a conversion.
http://www.performancetrucks.net/forums/sh...hlight=balancer
http://www.performancetrucks.net/forums/sh...hlight=balancer
http://www.performancetrucks.net/forums/sh...hlight=balancer
BTW, talked to Billy last night and he doesn't have a balancer available.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Thanks Red. 1slow01Z71 is going to pick one up for me and drop it off at the house.. That is service!!! Hopefully this will work. If not, I guess the engine has to come out for the crank.
Gone, but not forgotten!
Good luck man. Be sure you tighten the piss out of it as recommended. I snake a chain through mine and bolt the chain to a hole in the block behind the heater hoses when I tighten the crank bolt. You just about have to do it in the truck in order to get the recommended amount of torque on it.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote