An adpater with a 3/8" compression fitting to -AN will do the trick after you buy a 3/8" quick connector to plug into the filter.
An adpater with a 3/8" compression fitting to -AN will do the trick after you buy a 3/8" quick connector to plug into the filter.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
<div class='quotetop'>QUOTE(RedHeartbeat @ Aug 29 2006, 05:45 PM) [snapback]62940[/snapback]</div>An adpater with a 3/8" compression fitting to -AN will do the trick after you buy a 3/8" quick connector to plug into the filter.
[/b]
I saw your post in the part numbers thread, and finally joiund what the last dormans piece was. If I can't finde something by tomorrow (been searching all day) I'm going to use that piece w/ a compression fitting.
'91 chev. Reg. Cab SB. Frame off, escalade clip, ART F&R susp., SSBC rear disks, SSBC Force 10 front kit, Auburn LSD, '00 LS1 and 4l60e. Almost all done!
http://s57.photobucket.com/albums/g220/98hd/Chev/
Posting Permissions
Reply With Quote