+ Reply to Thread
Results 1 to 8 of 8

Thread: ls1 into 88 4x4

Hybrid View

  1. #1
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    The 4x4 frame is so different that I cannot tell if you'd have to notch or not. THe best way is to just drop it in there and see what you have for clearance. You may not have to do anything. For accessories, post up on LS1tech, Corvetteforum, LS1GTO, Performancetrucks.net and anywhere else you can think of for them. I think the Vette accessories would be best, then the truck and finally the fbody. I reserve the Fbody for last only because the alternator is next to the steering box. If you get it up high it makes for an easier conversion. I did fbody on my 93 and 92. It works fine but it's tight. The high mount alternator will allow you to move the engine fwd or backward as needed to bolt to the stock transmission location.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  2. #2
    Join Date
    Feb 2006
    Posts
    14
    <div class='quotetop'>QUOTE(RedHeartbeat &#064; Jun 21 2006, 11&#58;44 AM) [snapback]55927[/snapback]</div>
    The 4x4 frame is so different that I cannot tell if you&#39;d have to notch or not. THe best way is to just drop it in there and see what you have for clearance. You may not have to do anything. For accessories, post up on LS1tech, Corvetteforum, LS1GTO, Performancetrucks.net and anywhere else you can think of for them. I think the Vette accessories would be best, then the truck and finally the fbody. I reserve the Fbody for last only because the alternator is next to the steering box. If you get it up high it makes for an easier conversion. I did fbody on my 93 and 92. It works fine but it&#39;s tight. The high mount alternator will allow you to move the engine fwd or backward as needed to bolt to the stock transmission location.
    [/b]
    yea, im a member on tech with over 900 posts, i used to have a trans am. I dont think "finding" the parts would be a problem, its just trying to decide on which ones to get..ahhah. I just know that there cant be much difference in the truck frames now and the truck frames then..so i would think the truck accessories would work better but i have NO clue..i wish i could find someone who could say, yes i ve done the same thing..here is what you will need...wishfull thinking hahah

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts