Lots of pictures coming first time swap LQ9/5 speed going in a 92 k1500

[fabunlimited]

Welcome to the site tons of info on here And lots of very helpful members. Whats that cam speced for?Seems a lot different from what I seen in the ls world.If its something that just came with the motor Id consider having someone(LS noligable) look at the profile before installing it .

[fabunlimited]

Not bashing it (Im not a pro on cam profiles) I just made a few bad choices when I did my first build and waisted time and money.Good luck on the build Love the OBS trucks.they are a great foundation to build on Pat G or Brian Tooley are smart dudes

[GreyChevy]

Welcome to the site tons of info on here And lots of very helpful members. Whats that cam speced for?Seems a lot different from what I seen in the ls world.If its something that just came with the motor Id consider having someone(LS noligable) look at the profile before installing it .

Thanks man!

I had a LS guy that I trust design it for me but I'm no cam expert either so was just seeing what some other knowledgeable cam guys thought. I was told that cam profile should get the DCR where it needs to be without me needing to mill the heads.

[GreyChevy]

Buying the last bit of parts for the swap today. Also mailing out my harness today to Standalone Solutions and the computer to Nelson Performance. Once I get those back we'll get the swap underway! I'm getting pretty excited!

[chvy=power]

What clutch and flywheel are ya gonna use?

[GreyChevy]

What clutch and flywheel are ya gonna use?

Flywheel is a sachs 1050. Didn't plan on buying a new clutch because I'm swapping in a nv4500 as soon as I find a good used one. Are the clutches for a nv3500 and nv4500 interchangeable?

[chvy=power]

You have to run a LS 4.8 clutch with the 1050 flywheel....the older ones won't fit and the bolt holes are different. I ran the RAM 1550 flywheel and it will run the LS clutch or the sbc clutch. And I'm not sure if the 3500 and 4500 use the same clutch but I don't see why they would be different..

[GreyChevy]

Damn, thanks! You don't happen to have a part number for the LS 4.8 clutch do you?

[GreyChevy]

You have to run a LS 4.8 clutch with the 1050 flywheel....the older ones won't fit and the bolt holes are different. I ran the RAM 1550 flywheel and it will run the LS clutch or the sbc clutch. And I'm not sure if the 3500 and 4500 use the same clutch but I don't see why they would be different..

You sure the bolt holes are different on the sach 1050? My buddy did a 5.3 swap with nv3500 in a 90 k1500 and used his stock clutch with the 1050. They also put a stock one in another friends 90's model with 5.3 swap.