Lots of pictures coming first time swap LQ9/5 speed going in a 92 k1500

[chvy=power]

pretty similar to the swap im doing! Those 10 bolt g80s arent worth 2 pennies...If you need any help or have any questions feel free to hit me up

[GreyChevy]

pretty similar to the swap im doing! Those 10 bolt g80s arent worth 2 pennies...If you need any help or have any questions feel free to hit me up

Thanks man....I've been reading through yours the past few days. Coming from the dodge world where nothing is interchangeable, I'm amazed how easy this swap appears to be. It's awesome how most of GM's parts over the years work together. I can't even istall a cam in my 4th gen Ram because the tuning is so raw and sucks....everybody that has installed one has seen no gain or negative gains.

[Mickeymotormount]

First off, welcome to the site. Lots of guys here with lots of knowhow. Hope your swap goes well. Good Luck!!!!

[chvy=power]

Yea gm definitely has it figured out....the possibilities with a LS engine are endless

[GreyChevy]

First off, welcome to the site. Lots of guys here with lots of knowhow. Hope your swap goes well. Good Luck!!!!

Thanks man!

[GreyChevy]

Ordered some parts today: sach 1050 flywheel, adapters for water temp and oil temp senders, the setbacks for the motor mounts, a set of PAC 1518 beehive springs, and the walbro 255 fuelpump. A few more parts to buy along with sending my harness off and mailing my computer to Nelson and I'll be ready to get the swap started!

[Nak]

Sounds pretty similar to my swap! I'm in the process of pulling the old motor right now... Did you keep the 11" drums on your 14 bolt? Great brakes! You need to swap in the appropriate combination valve though...

[fabunlimited]

Welcome to the site tons of info on here And lots of very helpful members. Whats that cam speced for?Seems a lot different from what I seen in the ls world.If its something that just came with the motor Id consider having someone(LS noligable) look at the profile before installing it .