1995 C2500 ls1 swap

[chvy=power]

Nice build, should be lots of fun to drive!

thank ya!

[chvy=power]

Update-

Sold the engine and blower to settle up with Uncle Sam for taxes....anyways picked up a 2010 LY6 6.0 to drop in. Gonna leave it stock except for a custom grind EPS 224/228 cam. Here she is!

[Mickeymotormount]

Update-

Sold the engine and blower to settle up with Uncle Sam for taxes....anyways picked up a 2010 LY6 6.0 to drop in.

Hate when someone has to do something like that. Anyway, looks like you have a nice replacement for the one you sold. Good luck with the swap.

[chvy=power]

Hate when someone has to do something like that. Anyway, looks like you have a nice replacement for the one you sold. Good luck with the swap.

Yea tell me about it! And thanks! It should still make plenty enough power and be fun to drive

[chvy=power]

Made the fuel lines And ran them. -6an fuel lines and vette regulator. Used some Russell adapter fittings to tie in at the tank. Man I love the look of braided stainless!

[Jeebalow]

Looking good! That new engine should be fun! I ended up flaring the stock steel lines for -6AN. But that braided stainless sure does look good. I also reused the stock fuel filter bracket which made the foam look like poo. I'll do what you did if I ever swap filters. I'll be watching your build and chime in wherever I can help. I also have a 95.

[chvy=power]

Looking good! That new engine should be fun! I ended up flaring the stock steel lines for -6AN. But that braided stainless sure does look good. I also reused the stock fuel filter bracket which made the foam look like poo. I'll do what you did if I ever swap filters. I'll be watching your build and chime in wherever I can help. I also have a 95.

Thanks man! yea iv never been any good at flaring anything, so thats why i went the route it did lol...
Question...im splicing in the fuel pump wire from my nelson harness to the factory wire for the fuel pump...now before i cut and splice, just want to double check and make sure that the purple wire is the one I want to hook to?