The truck it'll all be going into, (needs to be de-chromed,a little altitude adjustment and some new shoes i know)
The truck it'll all be going into, (needs to be de-chromed,a little altitude adjustment and some new shoes i know)
after the cam & valve spring install, motor still looking rough.
Cleaned up and painted
had some down time at work so i got rid off the dumb looking chrome grill and fender flare/trim? heres some pics of the grill.
Ok, so its been awhile since ive be on here heres some progress so far..
old and worn 4.3 is out
ran into some problems with the motor mounts passenger side v8 4x4 mounts working perfectly but the diver side was way off so ended up having to make an adapter plate out of 1/2 steel to make the 2wd V6 mounts work
"These are not the bolts i used, they were just for mock up"
heres the engine sitting on the new mounts
intake and front drive assembly on (Dirty)
every thing in and plumbed up still waiting on the harness..
3" exhaust with dynomax race bullet no cats..
trans cooler in and mouted
trans temp gauge and fan switch
finally got my harness back from current performance they repinned to work with my 03 fuse block.
just received my tuned PCM from nelson
Posting Permissions
Reply With Quote
