My middle son has been using my Denali for the last few months. I got it from him today to get the oil changed and give it a much needed bath. Come to find out that some how the dipstick was about half way out. And the tip is broken off. The piece is stuck in the tube.
Anyone have any idea how to get the piece out???
Tim
2004 GMC Yukon Denali XL AWD 6.0
1995 Suburban LT 4x4 soon to have LS power.
how do you know its stuck in the tube and not in the pan?? anyway, just take the tube off the motor and shove a pipe cleaner or something similar until it comes out....
Like Tumbler in "Gone in 60" I'll drive anything with wheels or without
My 95 ECSB LQ9 build thread - http://www.ls1truck.com/forums/lsx-t...to-95-obs.html
CALI LEGAL ENGINE SWAP!
Stock 03 LQ9, DBW, 95' 4l80e w/ Transgo shift kit, 2010 50# GM injectors, 2800 Circle D stall, Spectre CAI, Upgraded trans cooler, Home-made E-fans/shroud, Dual EP-381 fuel pumps w/Home-made hotwire kit
NEXT ON LIST: Dual Battery setup, CAM/Valvetrain upgrade, Build my own rear mount turbo, TRU-TRAC, HIT THE STRIP!!!
Well the dipstick doesn't go all the way down, seems like some blockage in the tube.
Tim
2004 GMC Yukon Denali XL AWD 6.0
1995 Suburban LT 4x4 soon to have LS power.
Posting Permissions
Reply With Quote