need help asap DBW-DBC conversion

[blacstar]

if you already have a dbw harness, find a tac module and pedal. swap with someone who has a dbc harness.
or find the male-end connectors for throttle position and idle air control; and wire in with the diagram lextech gave ^

[dickwiley]

I only have harness, and I have a dbc TB that was givin to me. So id need dbw TB pedal and tac. Thats more money than I wanna spend just for that when could be used for something else.

[dickwiley]

Jeff, so I'll have to do is cut plugs of the dbw harness for throttle body add the wires you have shown with new plugs and I should be good

[Lextech]

The DBW only has 2 wires going to the PCM. The rest of the wires in the DBW T/B connector go to the TAC Module (If I remember correctly). So, you need to run 7 wires from the PCM to the IAC and TPS.

Jeff