There would be a piece of 2 x 2 square tubing between the crossmember at the carrier bearing and there will be a piece of the body brace cut out to clear the topside of the driveshaft if you have that type of relocater.
There would be a piece of 2 x 2 square tubing between the crossmember at the carrier bearing and there will be a piece of the body brace cut out to clear the topside of the driveshaft if you have that type of relocater.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote