I use mission machine shop down Roosevelt to get all my heads milled $130 to mill .030 and $15 cleaning
They are fast too
I use mission machine shop down Roosevelt to get all my heads milled $130 to mill .030 and $15 cleaning
They are fast too
I knew there was something on roosevelt just couldn't remember the name, thanks Zach. Ill give em a call too.
4.8, TSP 220, 6L90 swap, 3400 Stall, 4.10s w/30" drag radial and T76 @ 16lbs.
Best ET 11.54@114 w 1.52 60ft
Raceweight 4905 lbs.
Thata cheap! Thanks broOriginally Posted by CHEVROLADE
4.8 FBO-PULLEY 228/228 CAM 4.10 GEARS TUNED BY NELSON...JUST CRUSUIN SAN ANTONIO!
Yea man go all the way north down Roosevelt ,cross military drive and it's about 10 blocks to your left
Cool do they do p&p also?
4.8 FBO-PULLEY 228/228 CAM 4.10 GEARS TUNED BY NELSON...JUST CRUSUIN SAN ANTONIO!
Motors been dropped off at Longs. They seem to know what theyre doing. Hopefully all works out.
4.8, TSP 220, 6L90 swap, 3400 Stall, 4.10s w/30" drag radial and T76 @ 16lbs.
Best ET 11.54@114 w 1.52 60ft
Raceweight 4905 lbs.
What you got going on. Ls based
2000*GMC longtubes nelson tune, built trans,trutrac circle d 278 mm stall 373 posi,100 shot of dope and 228 232 588 595 cam.
Maybe.
4.8, TSP 220, 6L90 swap, 3400 Stall, 4.10s w/30" drag radial and T76 @ 16lbs.
Best ET 11.54@114 w 1.52 60ft
Raceweight 4905 lbs.
Posting Permissions
Reply With Quote
