i just used the top of my passenger side battery tray, drilled out the 3 spots welds for the bottom bracket so its JUST the top tray. Drilled a hole in my inner fender, made a strap out of then steel and bolted it down with a 10 mm. Then I just got a drivers side battery tray and re located my battery over there since my air intake had to go where my pass side batt tray orriginally was.Originally Posted by foreverfalcon40
Silverado Z71 10" Lift COMPLETE 6.0/4L80E PRC 2.5 Ported LS6 Heads 228r Comp Cam 3200 CIRCLE D Stall LS7 Lifters ARP Bolts SLP Oil Pump and Double Timing Chain 160 T-Stat 3" SLP Loudmouth Electric Cutout Walbro 255 Pacesetter Longtubes MSD Starter NELSON Harmess NELSON Street/Strip Tuned ECM MSD Wires LS1 Throttle Body Braided Lines Spectre CAI 4.56 Gears Detroit Locker 14 bolt http://www.ls1truck.com/forums/lsx-t...wap-build.html
Posting Permissions
Reply With Quote