ls pcm in the obs glovebox

[foreverfalcon40]

It wont fit without major modification. I mounted mine on my passenger wheel well using the flat part from a battery tray

Please post pics of the mount and your engine bay.

[ecld_07]

Mines in my glove box...was a major pain in the ass to do...

[dimebagged]

I just put it in place of the old PCM behind the glovebox. Just remove the old PCM bracket. 95-96 dash.

[HPICamaroSS]

Please post pics of the mount and your engine bay.

i just used the top of my passenger side battery tray, drilled out the 3 spots welds for the bottom bracket so its JUST the top tray. Drilled a hole in my inner fender, made a strap out of then steel and bolted it down with a 10 mm. Then I just got a drivers side battery tray and re located my battery over there since my air intake had to go where my pass side batt tray orriginally was.