http://www.lt1swap.com
This website has tons of wiring info on it. It has all the pcm pinouts for all the years. And dont forget that the pcm shows ground for the SES light, not 12v.
http://www.lt1swap.com
This website has tons of wiring info on it. It has all the pcm pinouts for all the years. And dont forget that the pcm shows ground for the SES light, not 12v.
1971 c10- 6.0, 80e, 3500 stall, 228 230, schoenfeld LTs, Nelson tuned, 4.10 trutrac
Forgot to mention nice looking engine and trans you got. Where did you buy it, local to you?
"ALisSa1 Silverado"1990 Chevrolet RCSB● 2002 Chevrolet Camaro LS1/4L60EScrimpin Ain't Easy( . Y . )
Thanks, that's where i've been getting all my wiring info for my stand alone harness.Originally Posted by Silverado889
It wasn't local, it was at the salvage yard, just had to drive about 35 miles to get it, which isn't far. I figured since you lived in san antonio there was tons of salvage yards in your area.
I was planning on getting a motor from ebay, then started adding in shipping and decided it would be cheaper to look at a salvage yard.
Yeah there are plenty, but I am always looking for a place to recommend to someone. Especially if you had a good experience with them.
check out www.westexap.com that's where I got mine from.
here's a small update, my schoenfeld headers came in today, they're ceramic coated
I started working on my truck getting the old 350 ready to pull out. Also a picture of my truck that i'll be putting the 5.3 in.
Here's a couple pics from today
IMG_20130210_163957.jpgIMG_20130210_164037.jpgIMG_20130210_195627.jpgIMG_20130210_193644.jpgIMG_20130210_193608.jpg
Last edited by hotrod; 02-11-2013 at 01:14 AM.
When u fiqure out the ses color let me know I'm working on a 90 as well. I will let u know If I can find it also.
Posting Permissions
Reply With Quote