1999 2 Door Tahoe LSX Swap

[kerrige]

What type of Ypipe do you have?

[Wagonbacker9]

What type of Ypipe do you have?

assuming this was directed at me, I have a 99 5.3 pipe, but the cats were cut out of it, need a complete one.

[982dr]

Looking good! Love the 2 doors!

[redaddiction]

Little update, found an intake for my truck so I am closer to being able to do the swap. On another note I may have a 6.0/4l80e I could use instead.

[redaddiction]

Almost forgot, I added some NNBS seats out of my 2008 Tahoe into the 2 door Tahoe.


Untitled by MarcusRyan, on Flickr


Untitled by MarcusRyan, on Flickr


Untitled by MarcusRyan, on Flickr

[chvz99]

how was the fitment on those seats i want to do my crew cab with some nnbs seats also. where the stock wholes close to match or no

[redaddiction]

how was the fitment on those seats i want to do my crew cab with some nnbs seats also. where the stock wholes close to match or no

Not at all, the factory bolts holes are offest so the passenger side bolts further forward. The NNBS seats all bolt together in line if that makes sense. I had to stretch the frame on the jump seat to go wider than the tranny tunnel.

I will say though it was totally worth it, they are a million times better than my old seats. The best part though is the jump seat has a lot more storage than the old center console and a 12v outlet in the bottom, and then it's even lockable.