ok so im confused on how you did this. This 89 has stainless steel braided lines from the filter up to the throttle body already. So how do I convert it to the 5.3 fuel line fittins? Or can I just cute the braided hose and hose clamp onto the fuel rail?Originally Posted by silverado_lover
To cut the AN hose I used electrical tape, a chisel, and a hammer. I don't have any pictures of the fittings but these are the exact fittings I used
I went with the S&P adapters but search for minime168's thread on the adapters and there's a link to a cheaper source for the adapters and they're not chromed out lol
Welcome to the site!
Reply With Quote