+ Reply to Thread
Results 1 to 10 of 31

Thread: 03 silverado 4.3 to 5.3

Hybrid View

  1. #1
    So easy a caveman could do it. You need a engine harness from a 99-02 truck that has a cable throttle body, it don't matter if its a automatic truck. The speed sensor connector for the transmission is what you really need. Un bolt the 6cyl harness from the fuse box, connect the v8 harness, custom tune for the pcm. There is a few other steps but its actually pretty simple.

    The Fleet...
    2003 Suburban- 5.4 L59 331CI 10:5.1 Compression -Built by ME
    2004 Avalanche- 5.7 LS1 -NOT built by me
    2005 Silverado RCSB- 5.7 LS6 -Built by ME

  2. #2
    Join Date
    Aug 2007
    Location
    Honeywood, Ontario
    Posts
    6,994
    Quote Originally Posted by TXSZ66AVLANCHE View Post
    So easy a caveman could do it. You need a engine harness from a 99-02 truck that has a cable throttle body, it don't matter if its a automatic truck. The speed sensor connector for the transmission is what you really need. Un bolt the 6cyl harness from the fuse box, connect the v8 harness, custom tune for the pcm. There is a few other steps but its actually pretty simple.
    Uhm. No. You're wrong.

    You need to convert to DBW. It's a not a big deal at all, the truck is already setup for it and the pedal and TAC module will bolt right in. You need an 03-05 harness and pcm. You need the entire A/C setup, compressor, compressor bracket and any lines that attach to the compressor
    2006 Silverado
    Little Black Bitch

  3. #3
    You don't need to convert to drive by wire, you can....but only if that's what you want to do. Since the v6 truck is already a cable throttle its just one less step.

    The Fleet...
    2003 Suburban- 5.4 L59 331CI 10:5.1 Compression -Built by ME
    2004 Avalanche- 5.7 LS1 -NOT built by me
    2005 Silverado RCSB- 5.7 LS6 -Built by ME

  4. #4
    Join Date
    Dec 2010
    Posts
    21
    Quote Originally Posted by Frenchy View Post
    Uhm. No. You're wrong.

    You need to convert to DBW. It's a not a big deal at all, the truck is already setup for it and the pedal and TAC module will bolt right in. You need an 03-05 harness and pcm. You need the entire A/C setup, compressor, compressor bracket and any lines that attach to the compressor
    why would i want to convert to dbw if my truck doesnt have it and the truck im getting the 5.3 from doesnt have it?

  5. #5
    Join Date
    Jan 2012
    Location
    DFW, TEXAS
    Posts
    594
    Quote Originally Posted by jsisk View Post
    why would i want to convert to dbw if my truck doesnt have it and the truck im getting the 5.3 from doesnt have it?
    the harness/fuse box pins are different, its alot easier to just do what Frenchy said! save u time and stress

  6. #6
    Join Date
    Aug 2007
    Location
    Honeywood, Ontario
    Posts
    6,994
    Quote Originally Posted by TXSZ66AVLANCHE View Post
    You don't need to convert to drive by wire, you can....but only if that's what you want to do. Since the v6 truck is already a cable throttle its just one less step.
    Yes. You do. I have done the swap. Have you? The 99-02 engine harness and PCM will NOT work with the 03+ BCM. Without serious, re-engineering.

    Quote Originally Posted by jsisk View Post
    why would i want to convert to dbw if my truck doesnt have it and the truck im getting the 5.3 from doesnt have it?
    You want your truck to run without countless headaches right? My truck is a swap. There's other guys who have tried keeping DBC in the newer trucks, guess what? Those trucks are now DBW. There was a ton of changes between 02 and 03 electrically. Go DBW. or don't listen, do it ass backwards, go about it, have lots of trouble and go DBW anyway.
    2006 Silverado
    Little Black Bitch

  7. #7
    Join Date
    Dec 2010
    Posts
    21
    Quote Originally Posted by Frenchy View Post
    Yes. You do. I have done the swap. Have you? The 99-02 engine harness and PCM will NOT work with the 03+ BCM. Without serious, re-engineering.



    You want your truck to run without countless headaches right? My truck is a swap. There's other guys who have tried keeping DBC in the newer trucks, guess what? Those trucks are now DBW. There was a ton of changes between 02 and 03 electrically. Go DBW. or don't listen, do it ass backwards, go about it, have lots of trouble and go DBW anyway.
    Im not understanding at all so if my truck is not dbw and the engine im gettin is not dbw i still need to convert it?If so could i just by a 03 5.3 and the harness work with out doing dbw?

  8. #8
    Join Date
    Dec 2010
    Posts
    21
    Is there a thread how to convert dbw bc ive searched and cant find anything?

  9. #9
    Join Date
    Dec 2010
    Posts
    21
    Since im being told i need to convert to dbw should i just go ahead and get a 6.0 instead bc i found one out of a 03 but thought it would be a pain to do dbw so i didnt get it

  10. #10
    Join Date
    Jan 2012
    Location
    DFW, TEXAS
    Posts
    594
    Quote Originally Posted by jsisk View Post
    Since im being told i need to convert to dbw should i just go ahead and get a 6.0 instead bc i found one out of a 03 but thought it would be a pain to do dbw so i didnt get it
    it doesnt matter which engine you pick, just get a 03-07 harness, tac module, harness between gas pedal and tac module and the pedal its self. if this is too complicated for you, dont do it! sell urs and go buy a v8 truck

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts