ls3 into 06 silverado?

[farmtruc]

Here's all you do:

get the 58x to 24x ling box.
tap sides of block for gen 3 knock sensors, no drilling needed, just tap the holes, of course you'll have to extend the harness.
you'll need a 4bolt to 3bolt throttle body adapter, ebay! unless you're gonna use the stock 90mm, then you'll need the torquerush.com adaptor box
extend the cam sensor wiring.
your truck has a single fuel feed line, simple connect that to the ls3 intake rail.
injector clips are different, so cut your old ones off and give us a call for some ls3 injector clips; forget the truck adaptors, they suck, imo.
you'll need a tune, the stock injectors are over 40lb'ers, it'll foul the plugs if you start it with no tune.

just to be clear, you'll use the stock truck harness and pcm.

good luck,
allen


everything else is just basically installing the engine.

[5speedsilverado]

Here's all you do:

get the 58x to 24x ling box.
tap sides of block for gen 3 knock sensors, no drilling needed, just tap the holes, of course you'll have to extend the harness.
you'll need a 4bolt to 3bolt throttle body adapter, ebay! unless you're gonna use the stock 90mm, then you'll need the torquerush.com adaptor box
extend the cam sensor wiring.
your truck has a single fuel feed line, simple connect that to the ls3 intake rail.
injector clips are different, so cut your old ones off and give us a call for some ls3 injector clips; forget the truck adaptors, they suck, imo.
you'll need a tune, the stock injectors are over 40lb'ers, it'll foul the plugs if you start it with no tune.

just to be clear, you'll use the stock truck harness and pcm.

good luck,
allen


everything else is just basically installing the engine.

exactly what i was looking for, so to be clear i would use the knock sensors off my current 4.8?

[farmtruc]

yes

[5speedsilverado]

cool, one last thing, if i could get an ls3 out of a new camaro with all the accessories could i just drop it in like that?

[redaddiction]

cool, one last thing, if i could get an ls3 out of a new camaro with all the accessories could i just drop it in like that?

No, it won't fit correctly. You need to swap all of the accessories over from your truck including the oil pan. Then follow Allen's other tips.

[redaddiction]

Double Post.

You are over thinking this too much, you need to look for a LS3 that is a long block with intake. If you are looking for big power though for the price of the LS3 you could easily build a motor, save money and avoid the headaches of changing all the sensors.