Door speakers

[darnie1987]

these are what i got: SPR-17S ALPINE 6.5" TYPE R COMPONENT SPEAKERS SPR17S

Type-R 6-1/2" 2-way Component System
Power Handling:
Peak: 660 watts per set / 330 watts each side
RMS: 220 watts per set / 110 watts each side
Impedance: 4 ohms
Hybrid layered-pulp woofer with rubber surround
1" Textile ring-dome tweeter
External crossovers — 12 dB/octave (high -pass) and 6 dB/octave (low-pass) crossover points
Frequency response: 65 Hz - 27 kHz
Sensitivity: 87 dB
Top-mount depth: 2-5/16"

[RS/SS 4.8]

these are what i got: SPR-17S ALPINE 6.5" TYPE R COMPONENT SPEAKERS SPR17S

Type-R 6-1/2" 2-way Component System
Power Handling:
Peak: 660 watts per set / 330 watts each side
RMS: 220 watts per set / 110 watts each side
Impedance: 4 ohms
Hybrid layered-pulp woofer with rubber surround
1" Textile ring-dome tweeter
External crossovers — 12 dB/octave (high -pass) and 6 dB/octave (low-pass) crossover points
Frequency response: 65 Hz - 27 kHz
Sensitivity: 87 dB
Top-mount depth: 2-5/16"

These are the same ones i got n i love em. Got a alpine 55 x 4 Watt rms running them and they will make ur ears bleed at half volume.

[darnie1987]

nice... well now i know what to get

[ducky]

Not to hijack Ray, but what do people usually go with to replace with stock speakers with something other than components? In case they dont want to use an amp to power the speakers.

[lo-lyf]

good old 6.5" coaxials in front doors (disconnect factory tweeters for better sound). 4x6 rear in reg cabs and extended cabs, 6.5" in rear doors as well for crew cabs. This info is for 99-06 gm trucks. 07+ have some funky mounting plastics built into the speakers. You can either buy adapters or just cut the original speaker out.