You cannot go wrong with anything from digital designs. Very vert high quality stuff.Originally Posted by screaminchicken
You cannot go wrong with anything from digital designs. Very vert high quality stuff.
I have never heard bad things about any of the brands mentioned. Be sure and get an amp with enough power to push said component system, your aftermarket deck just won't be enough (for best sound quality).
2005 black Yukon XL SLT - traded in for me wife's new Fusion (GM sucks these days)
2002 black Yukon SLT (the skinny sister)
1969 green Pontiac GTO (Layla, AKA the black sheep)
INSTALLS AND MORE.. http://www.ls1truck.com/forums/my-ga...-low-life.html
Sticky/broken gauges? I can help. PM me for details.
no to highjack the thread but i got the type S component set and they sound pretty good but i was jw whats a good amp for them im running them and clerion 6x9's in the back?
Built 2 Run! 6XX HP/ 6XX TQ
Just make sure your amp rms output matches the power handling of your speakers. Example. A pair of four speakers that can handle 75w rms each need a four channel amp that pushes 75w rms per channel.
Brand is personal preference for the most part. Pay the most attention to the rms power. Sony xplod amps are labelled with their max wattage, rms on a 1000w Sony xplod amp is only about 200-300 watts. A Rockford Fosgate power 500.1 actually pushes 650-750 watts rms. In other words, don't fall for the gimmick, research and buy a good amp. I like Rockford punch and power amps because they are powerful, efficient, and leave a small footprint.
2005 black Yukon XL SLT - traded in for me wife's new Fusion (GM sucks these days)
2002 black Yukon SLT (the skinny sister)
1969 green Pontiac GTO (Layla, AKA the black sheep)
INSTALLS AND MORE.. http://www.ls1truck.com/forums/my-ga...-low-life.html
Sticky/broken gauges? I can help. PM me for details.
Just put a nice set of components in my G8, Polk's for $200, I really like them.
these are what i got: SPR-17S ALPINE 6.5" TYPE R COMPONENT SPEAKERS SPR17S
Type-R 6-1/2" 2-way Component System
Power Handling:
Peak: 660 watts per set / 330 watts each side
RMS: 220 watts per set / 110 watts each side
Impedance: 4 ohms
Hybrid layered-pulp woofer with rubber surround
1" Textile ring-dome tweeter
External crossovers — 12 dB/octave (high -pass) and 6 dB/octave (low-pass) crossover points
Frequency response: 65 Hz - 27 kHz
Sensitivity: 87 dB
Top-mount depth: 2-5/16"
Built 2 Run! 6XX HP/ 6XX TQ
These are the same ones i got n i love em. Got a alpine 55 x 4 Watt rms running them and they will make ur ears bleed at half volume.
4.8, TSP 220, 6L90 swap, 3400 Stall, 4.10s w/30" drag radial and T76 @ 16lbs.
Best ET 11.54@114 w 1.52 60ft
Raceweight 4905 lbs.
Posting Permissions
Reply With Quote
