Cottontop 11's swap. So it begins

[gagliano7]

Check out this throttle body. http://www.ebay.com/itm/NEW-LS1-LS6-...sories&vxp=mtr Heard alot of good things on ls1tech about these.

[cottontop11]

Been in Vegas this past week. Ordered my cable tb, filled out my tune form for np. It wont be long now. The only thing on my tune form that puzzled me is I dont know how much TM to take out. Im running a 4L80 OUT OF A 03 2500HD.

[myzterray]

Been in Vegas this past week. Ordered my cable tb, filled out my tune form for np. It wont be long now. The only thing on my tune form that puzzled me is I dont know how much TM to take out. Im running a 4L80 OUT OF A 03 2500HD.

ha you just left my city.

[cottontop11]

ha you just left my city.

I started to pm you. I thought you had said before that u were in LV. I did good came back 2k to the good

[myzterray]

I started to pm you. I thought you had said before that u were in LV. I did good came back 2k to the good

you got lucky lol..

[RedHeartbeat]

You should ohm out the wires between the PCM and the TPS sensor plus double check the wires are going to the right PCM pin location. Have you tried swapping out to a known good TPS? Where are you located?

[cottontop11]

You should ohm out the wires between the PCM and the TPS sensor plus double check the wires are going to the right PCM pin location. Have you tried swapping out to a known good TPS? Where are you located?

Im in central Alabama. No i haven't tried a known good tps. I will ohm the wires tomorrow
and check their pinout.