Quote Originally Posted by bobbylog View Post
Does the vss on your np241 have the same connector the nelsons harness use? If yes the first step would be to simply unhook your obs connector and plug the nelsons second connector.If the tranny shift try the 4x4 and if it don't work (I not sure but think it need a vss input) you may need to cut the 2 wire on your obs vss or nelsons and hook them together so the 6L pcm and the old obs pcm will receive signal of the T-case vss. Before cutting a wire I would try if the 4x4 engage with the first vss on nelsons and the T-case on the obs.If yes it time to cut!
Nope, 2 completely different connectors lol otherwise I would have tried just plugging in nelsons connector. And yes the 4x4 does engage with nelsons input vss connector and my obs output vss. So i will go out there and snip snip. thanks for helpin