94 Lifted Silverado 6.0/4L80e swap Build

[HPICamaroSS]

Got the tranny bolted up to the motor this morning. Lined up pretty good, for me finding out that the pins that help you line the motor and trans up were missing at the last second. Still got it bolted in with the torque converter bolted to the crank. Going to put the transfer case in a little later. I have to clean the old paper gasket material off and add some silicone first. I went with a 94 3/4 241c transfercase so it matches the 32splines. Get step by step closer to getting to the wiring. oh yea. long tubes will be here monday :-)

[LeadSled96]

Looks like your making nice progress man!!!! Im jealous! Want to come help with mine!?

[HPICamaroSS]

Looks like your making nice progress man!!!! Im jealous! Want to come help with mine!?

lmao I will never be done with mine, been working on it for 3 months now!

[HPICamaroSS]

Few updates and tips. For using the 6.0 / 4l80e combo with the dirty dingo mounts, the transmission crossmember has to be moved back to the next set of holes (easy). For trucks with a suspension lift like mine, you have to mess with the dam suspension parts because they connect to that cross member (which was a pain in my butt, actually a pain in my nose, since one of the bars fell down on me and broke my nose) Mother #@%@#$%!! Anyway, that stuff is all buttoned up, I recieved my headers (pacesetter long tubes) but before I put them on Im waiting for my msd mini starter to arrive from summit since I know it will be a tight squeeze. I also am replacing the knock sensors while I have the intake off (expensive but worth it) Today I am going to try getting the power steering lines hooked up correctly / deleting the hydroboost line. Also need to get my gas pedal / module in there I will see how easy that goes. Ill post updated pics later today of the progress!