gmc sierra 1500 with 2500 suspension and differentials !!!!

[J Industries]

I vote its a 2500 with bobbed frame.
It has torsion bars not the struts and the steering is totally different between the two.
Plus the frame in that wheel well looks a little bigger than a half ton frame.

[BigMac]

Unless the truck has a dmax in it I wouldn't even bother with such a project. If you want heavier running gear, throw in a High Pinion D60 and either a 4-link up front or leafs. But I have a feeling you're going for the mall crawler look and not functionality so just save your dime and do a 7" IFS lift on a RCSB half ton
.

[nescafe4all]

some says it's 2500hd

and done a project on it to install 1500 bed on it !!

that could be true because it sounds easier

[bartjo06]

Looks like 2500 with chopped frame. As far as the lift, it looks like a 10-12 Cognito with 20x10 XD Diesels and 37x13.5 Toyo MTs.

Would definitely drive.

[tanz45]

I vote its a 2500 with bobbed frame.
It has torsion bars not the struts and the steering is totally different between the two.
Plus the frame in that wheel well looks a little bigger than a half ton frame.

x2, Torsion bars are the give away.