Werd, got mine fo 2 fityOriginally Posted by 91blkstpsd
Werd, got mine fo 2 fity
95 C1500 LM7, built 4L60e, Circle D 3200, LT's, Nelson tune, open differential, 3.42, and LS1 e-fans. Tractionless
Nice thread! I just read through it all.
Love the "factory" look with the engine covers. I have the same covers on my LQ9. I can't wait to get this swap done in my 95 z71 RC!
I plan to do a cam and maybe some light head work mainly for the sound. I want to run the stock converter till my transmission goes.
How does the Josh Powers A/C bracket compare to a dirty dingo one or some of the others out there? I really would like to use the LS A/C compressor but it looks like quite a bit of work.
95' RC z71 DD ''wrecked''
Here's a few more pics over the weekend. My gauges arent 100% correct yet but I have the Torque app on my phone that reads my PCM so I used it for accuracy. Just wanted to show how they look lit up. And also the HIDs at night.
91 Silverado Stepside, LT1, 4L60e, Hotcam, RRs, Headers, 52mm TB, built trans, 20" Coys, 5-7, etc...
93 Silverado, 5.3L, 5 speed, 5-7, 20"s, GMC grille,molded pan, 454SS fogs, HIDS, etc...
06 Silverado Crew Cab Z71, LTs, full SLP exhaust, tune, CIA, 6" lift, 35"s, DVD, etc...
I want that valence but I know it would get torn up
95 C1500 LM7, built 4L60e, Circle D 3200, LT's, Nelson tune, open differential, 3.42, and LS1 e-fans. Tractionless
You already have that valance! lol I had a plain one and cut the holes myself. Mine actually had the outline on the back of it already. These are cheap BLAZER lights from parts store I converted to HID. They are the same style as the 454SS had.I want that valence but I know it would get torn up
91 Silverado Stepside, LT1, 4L60e, Hotcam, RRs, Headers, 52mm TB, built trans, 20" Coys, 5-7, etc...
93 Silverado, 5.3L, 5 speed, 5-7, 20"s, GMC grille,molded pan, 454SS fogs, HIDS, etc...
06 Silverado Crew Cab Z71, LTs, full SLP exhaust, tune, CIA, 6" lift, 35"s, DVD, etc...
I'm going to go check to see if mine has that outline...if it gets torn up I'll just zip tie it back up
95 C1500 LM7, built 4L60e, Circle D 3200, LT's, Nelson tune, open differential, 3.42, and LS1 e-fans. Tractionless
I'm on my 3rd factory one idk if the 4th one could handle lights lol
1989 RCSS 5.3/4L60E swap
- 224/230 .581.591 112lsa,
- 3200 Stall
- DJM 4/6 drop
- Nelson Tuned
Building the truck GM never did..
Ive went thru 3 on my blk truck too. But good thing is I can get the plain ones for like $15 so its not too bad IMO.
91 Silverado Stepside, LT1, 4L60e, Hotcam, RRs, Headers, 52mm TB, built trans, 20" Coys, 5-7, etc...
93 Silverado, 5.3L, 5 speed, 5-7, 20"s, GMC grille,molded pan, 454SS fogs, HIDS, etc...
06 Silverado Crew Cab Z71, LTs, full SLP exhaust, tune, CIA, 6" lift, 35"s, DVD, etc...
How much can you ship one to 75087 for lol every where I have seen they want at least 40 or 50
1989 RCSS 5.3/4L60E swap
- 224/230 .581.591 112lsa,
- 3200 Stall
- DJM 4/6 drop
- Nelson Tuned
Building the truck GM never did..
This is all it is... A 454ss style will run you bout $50. But make your own out of a plain one.
http://www.ebay.com/itm/88-98-GMC-SI...item2301b14dba
91 Silverado Stepside, LT1, 4L60e, Hotcam, RRs, Headers, 52mm TB, built trans, 20" Coys, 5-7, etc...
93 Silverado, 5.3L, 5 speed, 5-7, 20"s, GMC grille,molded pan, 454SS fogs, HIDS, etc...
06 Silverado Crew Cab Z71, LTs, full SLP exhaust, tune, CIA, 6" lift, 35"s, DVD, etc...
Posting Permissions
Reply With Quote
