+ Reply to Thread
Results 1 to 10 of 24

Thread: Drop Leaf springs

Hybrid View

  1. #1
    Do a flip kit. You will be bottoming out on the frame with hangers and shackles. C notch is the way to go to not bottom out. A set of helper bags is a must and with them you can tow. I am going to sell a set of helper bags in a couple of weeks.
    Don't forget a set of lower shocks. They are real important.
    99RCSB Broke because I wasted thousands and thousands of dollars on my truck.

  2. #2
    Join Date
    Oct 2011
    Location
    Fayetteville , NC
    Posts
    163
    Quote Originally Posted by zeake View Post
    Do a flip kit. You will be bottoming out on the frame with hangers and shackles. C notch is the way to go to not bottom out. A set of helper bags is a must and with them you can tow. I am going to sell a set of helper bags in a couple of weeks.
    Don't forget a set of lower shocks. They are real important.
    How much do you want for the helper bags?
    '02 GMC RCStepSide 4.8 , Thumpr Cam , 3200 Stall , OBX LTs , MSD Wires , TrueTrac , 4.10s , 3/5 Drop , bolt in traction bars by LSX Powersports , EFI Live tune by LSX Powersports

    15.2 @ 90 , 2.3 60' (Only mods at this time , LTs)

  3. #3
    Quote Originally Posted by Munkee68W1P View Post
    How much do you want for the helper bags?
    Depends on if you want the compressor and air gauge + paddle switch or just the bags. I won't have them ready till after thanksgiving.
    99RCSB Broke because I wasted thousands and thousands of dollars on my truck.

  4. #4
    Join Date
    May 2010
    Location
    Galveston, Tx
    Posts
    677
    I have Hotchkis leafs...I didn't want a stock ride, I wanted it to be firmer/sportier. You can definitely fell a difference when your taking 90º turns at 35 MPH

    I can still haul my 4 wheeler with no problems, don't have any pictures of that though. But what about a 5.3?

    95 C1500 LM7, built 4L60e, Circle D 3200, LT's, Nelson tune, open differential, 3.42, and LS1 e-fans. Tractionless

  5. #5
    Join Date
    Oct 2011
    Location
    Fayetteville , NC
    Posts
    163
    Quote Originally Posted by zeake View Post
    Depends on if you want the compressor and air gauge + paddle switch or just the bags. I won't have them ready till after thanksgiving.
    Most likely just the bags. Does it have the fitting to fill them with a regular air hose? The drag bag on my 3rd gen did.
    '02 GMC RCStepSide 4.8 , Thumpr Cam , 3200 Stall , OBX LTs , MSD Wires , TrueTrac , 4.10s , 3/5 Drop , bolt in traction bars by LSX Powersports , EFI Live tune by LSX Powersports

    15.2 @ 90 , 2.3 60' (Only mods at this time , LTs)

  6. #6
    I can probably come up with one. I would make sure it is complete. T fitting lines etc. I am thinking about 125.00.
    99RCSB Broke because I wasted thousands and thousands of dollars on my truck.

  7. #7
    Join Date
    Oct 2011
    Location
    Fayetteville , NC
    Posts
    163
    Quote Originally Posted by zeake View Post
    I can probably come up with one. I would make sure it is complete. T fitting lines etc. I am thinking about 125.00.
    Where are you located and do you have paypal?
    '02 GMC RCStepSide 4.8 , Thumpr Cam , 3200 Stall , OBX LTs , MSD Wires , TrueTrac , 4.10s , 3/5 Drop , bolt in traction bars by LSX Powersports , EFI Live tune by LSX Powersports

    15.2 @ 90 , 2.3 60' (Only mods at this time , LTs)

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts