Where can I buy the high pressure fuel line that is designed to be used in the gas tank?
Where can I buy the high pressure fuel line that is designed to be used in the gas tank?
~ Forged engine of some type ~ Ball bearing turbo of an unconfirmed size ~ 4L8000 trans ~ Beefy fuel system ~
Napa
Slowest in Oklahoma...
Thanks but Napa only sells it in 1 ft. sections. I'm looking for a place that sells it by the foot. I'd like to get a 3 ft. section.
~ Forged engine of some type ~ Ball bearing turbo of an unconfirmed size ~ 4L8000 trans ~ Beefy fuel system ~
They cut mind off a big reel of it, looked like there was 20+ ft of it
Slowest in Oklahoma...
Checked with my local Napa. They don't have the submersible in-tank fuel hose. Anywhere place online that has it on a reel?
~ Forged engine of some type ~ Ball bearing turbo of an unconfirmed size ~ 4L8000 trans ~ Beefy fuel system ~
ive used regular FI hose intank in the past with no issues over the yrs. Since 08 ive had earls prolite black hose in my tank and the last full yr its been submerged in e85
2002 Lightning - GT headed 5.5Litre w/ Twin 7665s
2002 Silverado - 427Lsx w/ Twin gt4202s
2010 Silverado crewcab Z71 - 5.3litre w/ procharger
2000 Wrangler - 5.3litre with some stance
2014 Xsport- 3.5 Eco boost
412 Motorsports
it ain't that I'm too big to listen to the rumors, It's just that I'm too damn big to pay attention to 'em..That's the difference
Yes I have seen this happen three times. Over the last 9 years of builds.
One hose left a black residue in the tank.
One hose burst
One hose burst and was slimy when I pulled it out.
It happens that why the hoses have different spec.
For an extra 4.00 per foot cheap insurance. ?
It's not just the hose. It's the types if fuels out there.
Different blends different parts if the country.
Alcohol added etc.
Here's where you can order what you need....
http://www.jegs.com/i/Gates/465/27097/10002/-1
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709