hey im doing a similar swap. i have a 96 4wd 2 door tahoe and i just picked up a 5.3 from a 2005 avalanche. how easy is it to convert the dbw to the cable?
hey im doing a similar swap. i have a 96 4wd 2 door tahoe and i just picked up a 5.3 from a 2005 avalanche. how easy is it to convert the dbw to the cable?
96 2 Door Tahoe 4wd / 5.3 Swap / CAI / Tune / Pacesetter LTs / Magnaflow / LED Dash / Novak A/C Bracket /
http://www.ls1truck.com/forums/lsx-t...ders-pics.html
Originally Posted by myzterray
First thanks I'll check that out, if it doesn't work I'll just make her a 4x2. Oh well
Second it's not hard at all. The throttle bodies are interchangeable you just have to move a vacuum hose. The computer needs different programming and the wiring harness needs TPS and IAC provisions. If you're ordering a harness just order it with them on. Other then that it's. Bolt on!
The 2wd output shaft will be too long once you remove the tail shaft. You would need a 4x4 output shaft.
Also your 92 700r4 transfer case adapter will be a four bolt, and that 4L60e is a 6 bolt. You can get a 6 bolt adapter fairly easily.
Yeah I'm noticing that. I think I'm just going 4x2. I live in Texas. I'm fine without it. It's just another thing to add weight and break
Posting Permissions
Reply With Quote
